4 Reason To never Put Temperature Data Loggers within Fridge

New customers that have started looking for temperature data loggers to monitor their freezers and refrigerators typically ask, "do you have the temperature data logger that you can put in your fridge? " Based on the past experience with some customers who may have tried this approach, we recommend you don't keep the temperature data logger within the refrigerator! This sounds basic, but it's certainly easier than knowing the right way to place a probe from the fridge. However, there are four the explanation why you don't want that will put the temperature data logger within the refrigerator.

Reducing Signal If the "wireless temperature data logger" is needed with WiFi, bluetooth or other designs of wireless data, the metal casing on the refrigerator significantly reduces this "wireless" signal. It's like wanting to use your phone in an elevator. Sometimes this works, sometimes it will not. If the fridge carries a glass door, a signal may be received. But if cabinets and doors are made of metal, they rely on signals to get rid of small gaps around the actual door seals. Typically, this leads to a significant reduction with signal strength, which ends up in very limited or intermittent operations.

Reducing Battery Capability Another important reason would be that the low temperature in that refrigerator can greatly cut down the battery capacity. As a rule of thumb, the sort of lithium battery most very popular in temperature data loggers is Fifty percent cooler at 0°F. With low temperature, the internal resistance of the battery increases and this output voltage decreases. In short, this can lead for you to frequent battery changes. Some customers develop popular "USB Logger" range, which complains of less than a month of battery your life. These loggers are surprising for the reason that typically run for six to nine months on a set of batteries. It was later discovered which the recorder had been placed directly in a very refrigerator operating at 0°F.

Slowing Display If the device provides an LCD and needs to read data or alarm information from the display, it can possibly be difficult at low temps. The standard LCDS found in most low-cost temperature data loggers are designed to run at temperatures as long as 32 degrees Fahrenheit. If your temperature drops, the showcase responds very slowly, so the data around the screen may no longer be able to be updated. Usually, the monitor seriously isn't permanently damaged. It successful during preheating, but the particular LCD may malfunction on low temperatures.

Condensation Wounds After all, there is definitely a risk that the temperature data logger shall be damaged by internal condensation when its removed from the freezer cooler. At some point, the device is usually pulled right out the refrigerator to download your stored data. On nice days, leaving the cold data recorder around the table is like leaving a glass of ice water on the table. If the dew point is higher than the temperature of the recorder coming out of the refrigerator, condensation develops. Everyone knows that drinking water and electronics don't selection well! We received several upkeep equipment which showed obvious signs of internal moisture damage on account of condensation. Even if the original bug can be fixed, there is usually a new potential problem, and it's commended to do so.

I recognize it is. 4 reasons you simply can't put your temperature data logger while in the fridge. This may appear to be a task, but over time, it's a good idea to put in the temperature data logger exterior the refrigerator and run the probe inside. The simplest and most common method could be to pass the probe line over the door seal. Protection by using small aluminum foil tape (for HEATING AND COOLING applications) prevents door wear.